![](/images/new-backgrounds/1174784/1747849x1.webp)
Step 6. Install the SANsurfer Switch Manager Application
The SANsurfer Switch Manager application includes the Configuration Wizard. This wizard
1.Insert the supplied CD into the CD ROM drive of the Windows workstation/server.
2.From the tabs at the top of the product introduction screen, click SANsurfer Switch Manager.
3.Locate your platform in the table and click Install.
4.Double click on the Windows_5.0x.xx.exe file to begin installation.
5.If the product introduction screen does not open, open the CD with Windows Explorer and run the installation program with the following path:
Switch_Manager\Windows_5.0x.xx.exe
Step 7. Obtain Network Configuration
❑Obtain the IP address and subnet mask from your network administrator.
Step 8. Run the Configuration Wizard
❑
❑Connect the switch and the workstation using an Ethernet crossover cable, switch, or hub.
❑The Configuration Wizard tool will
NOTE: If you are using an Ethernet switch and the
❑The Configuration Wizard may present several zoning options that show the corresponding storage and host connections. Choose the zoning option that best suits your Storage Area Network.
Step 9. Connect Devices and Switches
❑Connect fibre optic cables between the installed SFP transceivers and their corresponding devices. Each port
Congratulations!
You have successfully installed your QLogic® SANbox 1400 Series Switch!
3