7.6TV OUT: This option allows you to select the video format (NTSC/PAL) for video output resources. In the United States we use NTSC format.
7.7Channel selection buttons
You may select channels by using the corresponding buttons on the receiver to manually choose channel.
Channel 1：Up
Channel 2：Right
Channel 3：Down
Channel 4：Left；
Circulation Button ：Monitor screen circulates the image from Channel 1 to
Channel4 then back to Channel1. The receiver will skip the channels that do not have cameras assigned to them.
8 Troubleshooting
Symptom | Remedy |
|
|
The power does not | Check that the AC power cord is connected securely. |
turn on. | (In case of power failure) Check the breaker. |
| Check if Monitor is on and video format (NTSC / PAL) |
No image display on | is correct. |
Check monitor’s video cable and connections. | |
monitor | Confirm that the camera has power. |
| |
|
|
There is no sound. | Check if the audio cable is well connected to monitor. |
| |
|
|
| If there is a microwave oven close by, turn the microwave oven |
| off. |
Interruption in | You may have other units that run on the 2.4GHz signal. Move |
Image and Sound | their base away from both the transmitter and/or the receiver |
| Your home may have a metal frame that reduces the range of the |
| unit. |
| Move the Cameras and/or the receiver around to see it reception |
Poor Reception | improves. |
Quality | Try resetting Pairing between camera and receiver |
|
|
8
