1. Connect the other end of the camera cable to the camera's power supply and to the Video IN on the DVR
Push the connector from the power supply (1) into the red connector with the short chrome head (2). Plug power supply into outlet near DVR.
2.Make sure the Hard Drive (1) is in the bay (2) and locked.
Line up the opennings on the yellow BNC connector (1) with the stubs on the top & bottom of the connection on the DVR (2), push in and then turn clockwise to lock in place.
You need to push the drive in hard to snap it into the connector in the DVR
3.Plug the DVR power cord into the bottom connector on the back of the DVR (1)
Turn the key from the horizontal position (1) to the vertical position (2) to lock the hard drive bay.
4.After you attach all 4 cameras
you will see quad screen on the Monitor
Turn the DVR on by pushing in on the
power switch above the power connector (2)
Page 3
