Remote Gain Attenuator
A
By varying the voltage on 
(pin 2) between 
(pin 1) and 
(pin 3, ground), the
volume can be linearly controlled. The voltage on 
can be created by using a potentiometer or provided from an external source. Many KW Series systems can be controlled from a single potentiometer by connecting the pins of multiple KW Series speakers together.
A relay or manual connection can be made between 
(pin 2) and 
(pin 3, ground) to effectively mute the output and put the KW Series system into standby mode after 5 minutes.
CAUTION: Do not put more than +5V or less than ground on 
(pin 2), or damage may
occur. Do not connect +5V (pin 1) directly to 
(pin 3, ground).
Schematics of Proper Wiring for Remote Gain Attenuator
When using a single potentiometer for one loudspeaker.
When using a single potentiometer for multiple loudspeaker.
Remote Gain Attenuator
EN
Wiring to the 3 pin “Euro” connector.
19
