PowerLight™ 3 Series

Specifications

 

PL325

PL340

PL380

 

 

 

 

Stereo Mode (both channels driven)

 

 

 

8Ω / EIA 1 kHz / 1% THD

500 W

800 W

1500 W

4Ω / EIA 1 kHz / 1% THD

850 W

1250 W

2500 W

2Ω / EIA 1 kHz / 1% THD

1250 W

2000 W

4000 W*

 

 

Bridge Mono Mode

 

 

 

8Ω / EIA 1 kHz / 1% THD

1700 W

2600 W

5000 W

4Ω / EIA 1 kHz / 1% THD

2500 W

4000 W

8000 W*

Typical Distortion

 

 

 

(20 Hz -3 kHz, 3dB below clip, or

 

 

 

20 Hz - 5 kHz, 10dB below clip, or

 

 

 

20 Hz - 20 kHz, 20dB below clip)

 

 

 

8Ω

0.002 - 0.01%

0.002 - 0.01%

0.01 - 0.03%

4Ω

0.005 - 0.01%

0.005 - 0.01%

0.03 - 0.06%

2Ω

0.02%

0.02%

0.10%

Maximum Distortion

 

 

 

(20 Hz - 20 kHz, 1 dB below rated power)

 

 

 

4 - 8Ω

0.05%

0.05%

0.20%

Frequency Response (8Ω)

20 Hz - 20 kHz, +/-0.2 dB

20 Hz - 20 kHz, +/-0.2 dB

20 Hz - 20 kHz, +/-0.2 dB

Noise (20-20 kHz, 32 dB Gain)

-106 dB

-105 dB

-104 dB

Dynamic Headroom (4Ω)

2 dB

2 dB

2 dB

Damping Factor (8Ω)

500

500

200

Output Circuitry

Class H (2-tier)

Class H (2-tier)

Class D

Input Sensitivity

 

 

 

(26 dB Setting)

3.28 V

3.92 V

5.27 V

(32 dB Setting)

1.60 V

1.96 V

2.67 V

Input Gain (1.2V Setting)

34.5 dB

36.4 dB

39.1 dB

Input Impedance

>10k, balanced or unbalanced

>10k, balanced or unbalanced

>10k, balanced or unbalanced

Maximum Input Level

 

 

 

(1.2 V Setting)

11 V (+23 dB)

11 V (+23 dB)

10 V (+22 dB)

(32 dB Setting)

14.6 V (+25.5 dB)

18 V (+27.4 dB)

22 V (+29 dB)

(26 dB Setting)

25 V (+30 dB)

25 V (+30 dB)

25 V (+30 dB)

Controls and LEDs - Front Panel

Common: AC Power Switch, Power (Blue), Br Mono (Yellow), Par (Orange)

 

 

Each Channel: Signal -35 dB, -20 dB (Green), -10 dB (Orange), Clip/Prot (Red) Gain Control, 21 detents, 1 dB steps

Controls and LEDs - Rear Panel

Common: Input Mode: Parallel (Orange), Stereo (Green), Br Mono (Yellow) Sensitivity: 26dB (Orange), 32dB (Green), 1.2V (Yellow)

 

Each Channel: LF Filter: Off, 30 Hz (Yellow), 50 Hz (Orange) Clip Limit: Off, On (Yellow)

 

Input Connectors

Common: HD-15 DataPort (inputs wired in parallel with XLR)

 

 

Each Channel: Male XLR, Female XLR, 3-pin terminal block connector

 

Output Connectors

Each Channel: 5-way Binding Posts, Neutrik Speakon®, (Ch 1 wired to both channels)

 

Amplifier and Load Protection

Short circuit, open circuit, thermal, RF protection. On/off muting, DC fault shutdown, active inrush limiting

AC Power** / Cordset 

 

 

 

120V 50/60 Hz

8.5A / NEMA-15

12A / NEMA-15

18A / 30A Twist-Loc

230V 50 Hz

7.5A / Euro 16A

7A / Euro 16A

11A / Euro 16A

Dimensions (HWD)

Height: 3.5" (8.9 cm) 2 RU / Width: 19" (48.3 cm) / Depth: 15.63" (39.7 cm) from front mounting rails

Weight - Net / Shipping

22 lb (10 kg) / 31.5 lb (14.3 kg)

22 lb (10 kg) / 31.5 lb (14.3 kg)

24 lb (11 kg) / 33.5 lb (15.2 kg)

Agency Approvals

UL, CE, RoHS/WEEE compliant, FCC Class B (conducted and radiated emissions)

 

*Burst mode testing required due to AC service current limitations

**Representative of current draw with typical music program material with occasional clipping

All specifications are subject to change without notice.

QSC, the QSC logo and PowerLight are registered trademarks of QSC Audio Products LLC in the U.S. Patent and Trademark office and other countries.

Speakon and Powercon are trademarks of Neutrik. All other trademarks are the property of their respective owners. US Pat. 5767744. Other patents may apply or be pending.

1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174

qscaudio.com

PowerLight 3 Spec Sheet 03/26/08

Page 2
Image 2
QSC Audio warranty Qscaudio.com, PL325 PL340 PL380, Controls and LEDs Rear Panel

PL380, PL340 specifications

QSC Audio has long been a leader in professional audio equipment, known for its reliable and high-performance products. Among its impressive lineup, the PL340 and PL380 power amplifiers stand out as vital components for systems requiring exceptional sound quality and robust output capabilities.

The QSC PL340 is a versatile, lightweight amplifier that can deliver up to 750 watts per channel at 4 ohms. It is meticulously designed for various applications, ranging from live sound reinforcement to fixed installations. One of its standout features is the PowerLight 3™ technology, which combines high efficiency with a compact form factor, allowing for reduced weight without compromising audio performance. The PL340 also includes a built-in DSP (Digital Signal Processing) that provides various user-friendly features, including crossover, EQ, and delay settings, ensuring optimal sound quality tailored for different environments.

On the other hand, the PL380 is an even more powerful amplifier, providing an impressive 1,000 watts per channel at 4 ohms. This model is engineered with QSC's innovative Intelligent Thermal Management System, which intelligently adjusts cooling based on the operational conditions, maintaining performance while preventing overheating. Like the PL340, the PL380 also incorporates PowerLight 3™ technology, enhancing energy efficiency and minimizing rack space requirements.

Both amplifiers are equipped with comprehensive rear-panel connectivity options, including XLR inputs and speakON outputs, facilitating seamless integration into various audio setups. The user-friendly interface includes intuitive LED indicators that provide immediate status feedback on power, signal, and fault monitoring, simplifying setup and operation.

Additionally, the PL340 and PL380 are designed with durability in mind, featuring rugged steel chassis construction that withstands the rigors of touring and demanding installations. Their performance and reliability make them an ideal choice for sound engineers and venue operators looking for high-quality amplification solutions.

In summary, QSC Audio's PL340 and PL380 amplifiers embody a blend of advanced technology, robust power, and thoughtful design, making them essential tools for achieving superior audio fidelity in professional sound applications. Whether for a live concert, corporate event, or permanent installation, these amplifiers ensure that every performance is delivered with unparalleled clarity and power.