QSC Audio DB218-SW, AF218-SW, 369 user manual WL218-sw Controls and Connections, Input Connections

WL218-sw Controls and Connections

Input Connections

The WL218-sw input connectors are a pair of Neutrik NL4's wired in parallel. See Table 2 or the WL218-sw Input Plate for connector pinout.

Note pin numbers 2+ and 2- are wired straight through from one connector to the other. This accommodates using one input cable assembly (where appropriate) for sub- woofer and full range loudspeaker connec- tions. Additionally, pin numbers 1+ and 1- of both NL4s are wired in parallel.

The WL218-sw loudspeaker is not equipped with a crossover network. All signal pro- cessing must be done before connecting audio power to the loudspeaker.

Reconfiguring the Input Connections for Separate Transducer Connection

If separate transducer connection is required, the input plate may be removed and the wiring altered so that each transducer has a separate, dedicated connection. Or, the transducers can be connected in parallel on pins 1+, 1- or pins 2+, 2-.

If alterations to the wiring are made, ensure the input panel and connectors are clearly marked so the next user is aware of the mod- ification made.

WL218-sw Input Plate and pinout detail

WL218-sw

SUSPENSION OF THIS PRODUCT SHOULD BE

DONE BY QUALIFIED PERSONS FOLLOWING

SAFE RIGGING PRACTICES. OTHER RIGGING

LIMITATIONS MAY APPLY. SEE WARNINGS IN THE

INPUT/OUTPUT

WORKING

3400 LBS / 2430 LBS / 1700 LBS / 771

WEIGHT 206 LBS

PIN 1+

2+	QSC AUDIO PRODUCTS, LLC
	COSTA MESA CALIFORNIA, MADE IN USA

			White	+
			Black	-
	NL1	1+
	1+	1+
2-	1-
	2+	1-
		1-	Orange
				+
		2+
	NL2		Grey	-
		2+
	1+
2-	1-	2-
	2+	2-

9