I V . A S S E M B L Y

Seat Installation

It may be necessary to install the seat either prior to initial operation or after transporting your power chair. Contour seats are attached to the power base with the Universal Mounting System (UMS). The UMS con- sists of universal parts that may be attached to the seat, regardless of seat width or seat depth. The two main components are aluminum extrusions mounted to the seat base. These extrusions attach to a pair of trapeze bars that are mounted to the power base. See figure 11.

NOTE: If your power chair is equipped with a Spe- cialty Seat, Synergy Seat, or a TRU-Balance Power Positioning System, refer to the information provided in separate manuals.

WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may lose control of the seat if they do so.

To install the seat:

1.Tilt the seat back and slide the rear extrusion onto the rear trapeze bar. See figure 11.

2.Lower the front extrusion onto the front trapeze bar until the seat locks into place.

3.Flip the seat latch safety down.

WARNING! Make sure the seat latch safety is flipped down before using your power chair.

 

SEAT LATCH SAFETY

 

UNLATCHED

 

LATCHED

REAR

FRONT

EXTRUSION

EXTRUSION

 

TRAPEZE

 

BARS

4.Install the controller and route the harness to the back of the power base. See figures 12 and 13.

5.Loosen the rear shroud fasteners and remove the rear shroud. See figure 6.

6.Plug the controller connector into the power base.

See figure 7.

7.Replace the rear shroud and tighten the rear shroud fasteners. See figure 6.

8.Secure the controller harness to the armrest receiver with wire ties (contour seats only). See figure 13.

MANDATORY! Prevent controller harness damage! Avoid routing the controller harness on the outside of the armrest pad. Route the harness under the armrest or toward the inside of the armrest pad. Use correct tie- down points for controller harness to prevent the harness from getting caught in the drive tires, pinched in the seat frame, or damaged when passing through doorways.

Figure 11. Universal Mounting System and Contour Seat

Figure 12. Controller Routed on a TRU-Balance Power Tilt

22

www.pridemobility.com

Quantum 6000Z Series

Page 22
Image 22
Quantum 6000Z manual Seat Installation, To install the seat

6000Z specifications

The Quantum 6000Z represents a significant advancement in quantum computing, offering remarkable features that push the boundaries of what is possible in this revolutionary field. Designed with state-of-the-art technologies, it stands out due to its comprehensive architecture tailored for complex quantum calculations.

One of the key features of the Quantum 6000Z is its qubit design. Utilizing topological qubits, this system enhances error correction capabilities compared to traditional qubit systems. Topological qubits are more resistant to environmental disturbances, which is crucial for maintaining coherence during calculations. This innovation leads to increased stability and reliability in quantum computations, paving the way for longer computational tasks without significant error rates.

Another prominent technology integrated into the Quantum 6000Z is its advanced cryogenic cooling system. Operating at near absolute zero, this cooling mechanism minimizes thermal noise, optimizing qubit performance and ensuring the system functions effectively. The innovative cooling design contributes to the overall efficiency of the machine, allowing it to maintain optimal conditions for prolonged periods.

The Quantum 6000Z also boasts a highly scalable architecture, making it suitable for both small-scale laboratory experiments and large-scale industrial applications. With a modular design, users can easily upgrade or expand their systems as needed, promoting longevity and adaptability in an ever-evolving technological landscape. This scalability extends to software compatibility, as the Quantum 6000Z supports leading quantum programming languages, providing accessibility for developers and researchers alike.

In terms of connectivity, the Quantum 6000Z features an intuitive interface for seamless integration with existing computational infrastructures. This versatility allows organizations to harness quantum computing power without the need for an entire system overhaul. The built-in cloud access further enables users to run complex simulations and algorithms remotely, democratizing access to quantum technology.

Lastly, a key characteristic of the Quantum 6000Z is its focus on security. Quantum key distribution protocols are embedded into the architecture, providing a robust solution against cyber threats. This feature not only protects data during transmission but also establishes a pathway for secure communication channels in the post-quantum world.

In summary, the Quantum 6000Z stands at the forefront of the quantum computing revolution with its resilient qubit design, advanced cooling technologies, scalable architecture, and emphasis on security. Its capabilities promise to redefine industries, allowing for breakthroughs across sectors such as cryptography, materials science, and artificial intelligence.