Installation and Care Instructions | 7 |
CLEANING
The Synergy Solution can be easily cleaned. For information on cleaning the Synergy Solution Single Cover refer to “Cleaning the Optional Single Cover.”
To clean the Synergy Solution:
1.Locate the zipper on the rear side of the outer cover. See figure 2.
2.Unzip the outer cover and pull out the inner cushion, which is wrapped in a
3.Wash the outer cover in a washing machine on the COLD setting.
WARNING! Do not use bleach when washing the outer cover. Doing so may cause damage to the cover.
4. Spray the inner cover with a disinfectant, then wipe it clean.
WARNING! Never submerge the inner cushion of your Synergy Solution in water. Doing so may cause damage to the cushion.
5. Allow both the outer and inner covers to air dry.
WARNING! Do not attempt to put the outer cover in a dryer. This may cause shrinking.
6.Once both covers are dry, put the inner cushion back inside the outer cover. Zip the outer cover closed, and place the Synergy Solution back onto the seat of your chair.
INNER CUSHION WRAPPED |
IN |
OUTER COVER |
ZIPPER ON |
REAR SIDE |
Figure 2. Synergy Solution
www.quantumrehab.com | Synergy Solution |
