Airborne Enterprise Module Databook

Quatech, Inc.

 

 

Locate the antenna where there is a minimum of obstruction between the antenna and the location of the Access Points. Typically Access Points are located in the ceiling or high on walls.

Keep the main antenna’s polarization vertical, or in-line with the antenna of the Access Points. 802.11 systems utilize vertical polarization and aligning both transmit and receive antenna maximizes the link quality.

Even addressing all of the above factors, does not guarantee a perfect connection, however with experimentation an understanding of the best combination will allow a preferred combination to be identified.

8.6Performance

Performance is difficult to define as the appropriate metric changes with each application or may indeed be a combination of parameters and application requirements. The underlying characteristic that, in most cases, needs to be observed is the link quality. This can be defined as the bandwidth available over which communication, between the two devices, can be performed, the lower the link quality the less likely the devices can communicate.

Measurement of link quality can be made in several ways; Bit Error Rate (BER), Signal to Noise (SNR) ratio, Signal Strength and may also include the addition of distortion. The link quality is used by the radio to determine the link rate, generally as the link quality for a given link rate drops below a predefined limit, the radio will drop to the next lowest link rate and try to communicate using it.

The reciprocal is also true, if the radio observes good link quality at one rate it will try to move up to the next rate to see if communication can be sustained using it. It is important to note that for a given position the link quality improves as the link rate is reduced. This is because as the link rate drops the radios Transmit power and Receive sensitivity improve.

From this it can be seen that looking at the link rate is an indirect way of assessing the quality of the link between the device and an Access Point. You should strive to make the communication quality as good as possible in order to support the best link rate. However be careful not to over specify the link rate. Consider your applications bandwidth requirements and tailor your link rate to optimize the link quality e.g. the link quality for a location at 6Mb/s is better than it would be for 54Mb/s, if the application only needs 2Mb/s of data throughput, the 6Mb/s rate would provide a better link quality.

Aside from the radio performance, there are a number of other things that contribute to the link quality; these include the items discussed earlier and choices made when looking at the overall antenna gain. The antenna gain contributes to the Equivalent Isotropically Radiated Power (EIRP) of the system. This is part of an overall measurement of the link quality called link margin.

100-8080-110

8/11/2009

29

Page 28 Page 30
Page 29
Image 29
Quatech 802.11B/G manual Performance
Page 28 Page 30

802.11B/G specifications

Quatech 802.11B/G is a versatile wireless communication solution that has gained recognition for its reliability and performance in various industrial applications. Designed primarily for the industrial automation sector, this product offers robust connectivity and data transmission capabilities over Wi-Fi networks.

One of the standout features of the Quatech 802.11B/G is its compliance with the IEEE 802.11b and 802.11g standards. This ensures compatibility with a wide range of devices, enabling seamless integration into existing networks. The device supports data rates of up to 54 Mbps in the 802.11g mode, which is essential for applications that require quick and efficient data transfer.

In terms of technology, Quatech employs advanced wireless communication protocols that ensure a stable connection and minimize data loss. This is particularly important in industrial settings, where interruptions can result in costly downtime. The device utilizes error correction and encryption techniques to maintain the integrity and security of data being transmitted over the air.

Another important characteristic of the Quatech 802.11B/G is its operational range. The device can maintain a reliable connection across a significant distance, depending on the environmental conditions. This feature is crucial for applications that involve monitoring and control in large facilities, warehouses, or outdoor settings.

Power consumption is another critical aspect of the Quatech 802.11B/G design. The device is engineered for energy efficiency, making it suitable for applications where power resources may be limited. This feature allows for extended operational life in battery-powered devices without sacrificing performance.

The Quatech 802.11B/G is also equipped with multiple interfaces, including serial and Ethernet ports, facilitating easy connectivity with a wide array of devices. This versatility supports integration with various industrial equipment, sensors, and controllers, making the device highly adaptable to different environments.

Furthermore, the Quatech 802.11B/G is designed with durability in mind. It is built to withstand harsh conditions typical of industrial settings, ensuring long-lasting functionality and reducing the need for frequent maintenance or replacements.

In conclusion, the Quatech 802.11B/G offers a reliable and efficient wireless connectivity solution for industrial applications. Its compliance with industry standards, advanced communication protocols, extensive operational range, energy efficiency, and robust design make it a preferred choice for businesses looking to enhance their operational capabilities.
Top Page Image Contents