TM
Assembly
1 Install Rear Wheels 
1
Press the button in while sliding the rear wheel axle into the frame until you hear a “click” (Figure 1). Repeat for other rear wheel. Pull to confirm it is assembled securely.
2 Attach Shopping | 2 |
Basket |
|
Slide tab into tube at the front center (Figure 2). Secure an adhesive strap around frame above each rear wheel (Figure 2a).
2a
3 Install Front Wheel | 3 |
Assembly |
|
Squeeze the front wheel fork while inserting it into the frame tube. Push front wheel fork into frame tube until you hear a “click” (Figure 3). Pull to confirm it is assembled securely.
4 Unfold Stroller
Unfasten the transport hook and push the handlebar upward (Figure 4).
The frame will unfold itself. The handlebar will lock into place with a “click” (Figure 4a).
NOTE: The BuzzTM stroller frame has a unique mechanism that enables the automatic unfolding of the frame. The temperature can effect the functioning of this mechanism. In cold or frosty weather, the stroller may unfold more slowly than usual (at room temperature).
5 Adjust Handlebar Height
Squeeze the adjustment button and slide the handlebar to desired height (Figure 5). The handlebar will click into place.
6 Parking Brake
Always use the parking brake, even when standing still for only a few moments! Push down on the red pedal (P) behind the rear wheel to set the parking brake (Figure 6). Push the opposite pedal to release the parking brake.
41
2
4a 
5
6 
3
