Radio Shack 12-1632 owner manual Care, The Fcc Wants You To Know, Specifications

12-1632.fm Page 7 Wednesday, May 10, 2000 10:57 AM

3.To have the radio play for 90 minutes then automatically turn off, press SLEEP. SLEEP and 90 appear.

To have the radio play for less than 90 minutes, hold down SLEEP. The dis- played time decreases in 10-minute increments as you hold down SLEEP. Release SLEEP when you reach the desired play time.

4.To turn off the radio before it automati- cally turns off, press SNOOZE or press SLEEP again.

Note: Using the sleep timer feature does not cancel an alarm setting.

CARE

To enjoy your RadioShack AM/FM PLL Clock/Table Radio for a long time:

•Keep the clock radio dry. If it gets wet, wipe it dry immediately.

•Use and store the clock radio only in normal temperature environments.

•Handle the clock radio gently and carefully. Do not drop it.

•Keep the clock radio away from dust and dirt.

•Wipe the clock radio with a damp cloth occasionally to keep it looking new.

Modifying or tampering with the clock ra- dio’s internal components can cause a malfunction and might invalidate its war- ranty and void your FCC authorization to use it. If your clock radio is not performing as it should, take it to your local Ra- dioShack store for assistance.

THE FCC WANTS YOU TO KNOW

Your clock radio might cause TV or radio interference even when it is operating properly. To determine whether your clock radio is causing the interference, turn off your clock radio. If the interference goes away, your clock radio is causing the inter- ference. Try to eliminate the interference by:

•moving your clock radio away from the TV or radio

•connecting your clock radio to an out- let that is on different electrical circuit from the receiver

•contacting your local RadioShack store for help

If you cannot eliminate the reference, the FCC requires you that you stop using your radio.

SPECIFICATIONS

Frequencies:
AM		530–1710 kHz
FM		88–108 MHz
Output Power	350 mW at 10% THD
Power Sources:
Clock/Radio		120V AC
Battery Back Up	4.5 V DC (3 ⋅ AA)
Dimensions (HWD)		6 ⋅ 44/5 ⋅ 24/5 in
	(152 ⋅ 122 ⋅ 72 mm)
Weight (without batteries):		........... 1 lb 6 oz
		(625 g)

Specifications are typical; individual units might vary. Specifications are subject change and improvement without notice.

7