Radio Shack 12-1686 Basics, Setting the Clock, Saving Preset Stations, Currently saved frequency

The Basics

Setting the Clock

To set your radio’s clock, complete the following steps:

1.Turn on your radio.

2.Press and hold the CLOCK button until the time display appears with the hour blinking.

3.Use the TUN - / + buttons to set the hour and press the CLOCK button. The minutes value starts blinking.

4.Repeat step 3 for the minutes, AM/PM, date, month, and year. After you set the year, the radio display returns to normal with the updated date and time information.

Saving Preset Stations

To save a frequency in your radio’s memory, complete the following steps:

1.Press MODE to select the band (AM1, AM2, FM1, FM2) .

2.Select the frequency.

3.Press PRESET STORE.

4.Use the CH- /+buttons on the radio or use the number buttons on the remote control to select a preset station number.

5.Press PRESET STORE. to save the preset station. If you don’t press PRESET STORE again within a few seconds, the radio returns to normal mode without saving the frequency in memory.

Preset station number

Currently saved frequency

Note: Your radio provides six preset positions for each band (AM1, AM2, FM1,

10