Storing a Station in Memory

1.Slide OFF/ON/E-BASS to ON.

2.Press BAND to select FM or AM. <C or 7C appears.

3.Press UP8HOUR or DOWN9MIN to select a station.

1.Straighten the long end of the armband.

2. Wrap the long end of the armband around your arm.

2.

4.Press CLOCK/MEM. C;CE flashes.

Note: If the display stops flashing before you finish, press

CLOCK/MEM again.

5.Press the number button for the desired location. (For location 6, press +5 and 1; for location 8, press +5 and 3, etc.)

6.Press CLOCK/MEM again to store the station.

7.To listen to a stored station, press the number button for the desired station’s memory location.

REPLACING THE EAR PADS

For added comfort, you can replace the silicon ear pads on your supplied earbuds with foam ear pads (not supplied, available at your local RadioShack store).

1.Lift up the grill caps at the center of the earbuds.

2.Gently pull the silicon ear pads off the earbuds.

3.Fit new ear pads over the earbuds.

4.Snap the grill caps back into place.

USING THE ARMBAND

To attach the armband to the radio, insert the armband mount into the guides on the back of the radio, closed end first, and slide it into place until it locks.

Tabs

To remove the armband, press the tabs on the end of the armband mount inward and slide the mount off the radio.

3. Pull the short end of the

3.

armband over the long

end and fasten it with

 

the hook-and-loop tape.

 

LISTENING SAFELY

To protect your hearing, follow these guidelines when you use earphones.

Set the volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable level.

Do not listen at extremely high volume levels. Extended high- volume listening can lead to permanent hearing loss.

Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing.

Traffic Safety

Do not wear earphones while operating a motor vehicle or riding a bicycle. This can create a traffic hazard and could be illegal in some areas.

Even though some earphones let you hear some outside sounds when listening at normal volume levels, they still can present a traffic hazard.

SPECIFICATIONS

AM

520 – 1710 kHz

FM

87.5 – 108.1 MHz

Output Power

15 mW + 15 mW

Earphone Jack

1/8 in dia. (3.5 mm dia.)

Power Source

Two AAA Batteries

Alkaline Battery Life

33 Hours (FM), 45 Hours (AM)

Dimensions (HWD)

23/4 × 33/4 × 11/4 in (69 × 96 × 32 mm)

Weight (with battery)

3.9 oz (110 g)

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

Limited Ninety-Day Warranty

This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIA-

BILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSE- QUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the war- ranty period.

This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102

 

12/99

RadioShack Corporation

12-807

12A01

Fort Worth, Texas 76102

Printed in China

Page 2
Image 2
Radio Shack 12-807 Replacing the EAR Pads, Using the Armband, Storing a Station in Memory, Press CLOCK/MEM. CCE flashes

12-807 specifications

The Radio Shack 12-807 is a versatile and compact digital multimeter renowned for its reliability and ease of use. The device is particularly popular among hobbyists, technicians, and professionals in the electronics field due to its range of features and affordability.

One of the primary characteristics of the 12-807 is its dual functionality, offering both AC and DC voltage measurement capabilities. It can measure voltages up to 600V, making it suitable for a variety of electrical applications. The current measurement ranges are equally impressive, with the ability to measure up to 10A of both AC and DC currents. This dual current measurement feature ensures that users can handle most standard electrical circuits without the need for multiple devices.

The 12-807 also features a digital display that boasts a clear and easy-to-read interface. It utilizes a 3.5-digit LCD that displays values with precision, allowing users to quickly interpret readings. The display’s backlight enhances visibility in low-light conditions, making it suitable for both indoor and outdoor use.

In addition to voltage and current measurements, the Radio Shack 12-807 multimeter supports resistance measurement with a maximum range of 2 MΩ. This feature is invaluable for diagnosing circuit continuity and identifying faulty components. Moreover, the device includes a diode test function, enabling technicians to check the functionality of diodes and transistors effectively.

Other notable features include data hold functionality, allowing users to freeze the reading on the display for easier recording. The multimeter is also equipped with an automatic power-off feature that conserves battery life, ensuring longer usage between charges or battery replacements. The device is powered by a standard 9-volt battery, making it easy to find replacements.

The compact design of the Radio Shack 12-807, combined with its lightweight build, makes it portable and convenient to carry. Overall, the multimeter stands out as a reliable tool that delivers a wide range of measurement capabilities ideal for both novice and experienced users in the electronics field. In summary, the Radio Shack 12-807 is a practical and functional multimeter, providing essential measurement features suitable for various electrical tasks.