Radio Shack 15-1119A important safety instructions TV/FM 4-WayDistribution Amplifier, Connections

15-1119a.fm Page 1 Thursday, July 15, 1999 11:30 AM

Cat. No. 15-1119A

TV/FM 4-Way Distribution Amplifier

Your TV/FM 4-Way Distribution Amplifi- er lets you amplify and distribute the VHF signals from cable TV or an FM tuner, for example, to four different lo- cations. Signal amplification is neces- sary when a signal is split, to assure that the signal is strong enough when it reaches the TV, video disc player, an- other VCR, or another FM tuner.

Important: Read the Important Safety Instructions (supplied separately) be- fore using this product. This amplifier is not intended for use with outdoor VHF/ UHF antennas. For amplification of those signals, we recommend a UHF/ VHF/FM amplified coupler.

Notes:

•This amplifier is designed to amplify existing signals and to deliver a strong signal through mul- tiple in-home connections. It will not improve a poor signal.

•To avoid signal loss, reflections or “shadows” in your picture, output terminals that are not connected to a receiver (TV or VCR) should be terminated using terminating resis- tors (RadioShack Cat. No. 15- 1144).

WARNING: To reduce the risk of fire or shock hazard, do not ex- pose this product to rain or mois- ture.

CAUTION	!
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVIC- ING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the presence of uninsulated danger- ous voltage within the product’s en- closure that might be of sufficient magnitude to constitute a risk of elec- tric shock. Do not open the product’s case.

This symbol is intended to inform you

!that important operating and mainte- nance instructions are included in the literature accompanying this product.

CONNECTIONS

Your local RadioShack store can give you specific information for your con- nection needs.

Note: If you want to connect an output to a TV that has only 300-ohm screw terminals, use a 75-to-300 ohm match- ing transformer such as Cat. No. 15- 1140.

© 1997 Tandy Corporation.

All Rights Reserved.

RadioShack is a registered trademark used by Tandy Corporation.