Radio Shack 15-1858 manual $Cuke%Qppgevkqp, $CVVGT2QYGT, Gcvwtgu

.KIJVGF￿%NQEM￿ 68￿(/￿#PVGPPC

￿￿￿￿￿￿￿

Thank you for buying the RadioShack Lighted Clock TV/FM Antenna. It is perfect for receiving HD (High Definition) signals, and improving your TV or stereo receiver’s FM reception. You also can switch between the antenna and an external signal, such as cable, satellite or a video game. And, the large-digit display lets you see the time and temperature at a glance.

2QYGTKPI￿VJG￿#PVGPPC

$CVVGT[￿2QYGT

1. Lift the battery cover off the battery compartment on

the bottom of the antennaBattery Cover base.

2.Insert two AA alkaline batteries (not supplied),

as indicated by the polarity symbols (+ and -) marked inside.

3. Replace the cover.

#%￿2QYGT

You can power your antenna

with AC power using a 9V 100mA adapter and a size M Adaptaplug (neither supplied).

1.Attach a size M Adaptaplug to a 9V AC adapter, with its tip set to positive (+).

2.Insert the Adaptaplug into the antenna’s DC 9V jack. Then, plug the other end into a standard AC outlet.

Notes:

•If you need to use the backlight function, we recommend using the AC adapter to power the antenna.

•Internal batteries (if installed) automatically disconnect when you plug an AC adapter into the antenna.

•If the LCD display is abnormal, replace the batteries or disconnect all power and reconnect after 10 minutes.

(GCVWTGU

• 38” Telescoping Antennas - Extend fully and rotate for the best VHF and FM reception.

• UHF Antenna - Rotate up to 160° for best UHF reception.

• Backlight - Press to easily view the time and temperature in the dark.

• F°/C° - Press to switch the temperature between Fahrenheit and Celsius.

• ANT/AUX - Press to switch between the antenna and an external signal (such as cable, satellite, or video game system).

• AUX IN - Provide the connection for external antenna, video game or cable.

• Gold Plated Connector - Ensures best connection for external input port.

$CUKE￿%QPPGEVKQP

1.Place the antenna on or near your TV or FM receiver.

2.If your TV has an F-connector, connect the supplied coaxial cable to the antenna’s TO TV jack and your TV’s ANTENNA IN jack.

If your TV has a 300-ohm twin-lead connector, attach a 2-way splitter (not supplied) to the TV’s VHF and UHF terminal screws. Then, connect the coaxial cable to the splitter’s F-connector and the antenna’s TO TV jack.

3.Connect a second video source, such as a cable TV or video game, to the antenna’s AUX IN terminal using a 75-ohm coaxial cable/connector (not supplied).

Note: Visit your local RadioShack store for additional accessories you may need.

DC 9V

9V DCJACK

JACK

AUX IN

AUX IN

TO TV JACK

TO TV JACK

COAXIAL

CABLE