SET UP OVERVIEW

Your new Digital Audio Link Wireless 5.8GHz is easy to set up using your existing Home Theater or stereo components. This system is compatible with most audio source. Please take a few minutes to read this manual before you start.

1.Unpack the wireless system and accessories.

2.Select the best location to set up the transmitter and receiver.

3.Connect the transmitter to your audio source and power it on.

4.Connect the receiver to your rear surround speakers and power it on.

5.Adjust the antennas for best reception.

6.Set the input level on the transmitter for best sound level.

7.Adjust the receiver volume to the desired level.

PLACEMENT

It is best to place the transmitter and receiver as high as possible in an area where there will be the least traffic. Ô

We recommend you place the transmitter on top of your audio source or stereo stand. For use with a home theater system, hook the receiver up to the rear surround speakers.

CONNECTING THE TRANSMITTER

Connect the transmitter to your audio device using speaker wires or stereo cables. Do not use both speaker wire and stereo cables. Do not connect speakers to this transmitter. Ô

TRANSMITTER REAR VIEW

 

 

Antenna — Rotate

LINE IN — Connect the LINE OUT

DC 9V — Connect the

(Left and Right) from an audio source

supplied AC adapter to

180 degrees

to these inputs using stereo cables

the transmitter at this DC

horizontally, or tilt

(not supplied).

input jack

back and forth to

 

 

adjust the signal

 

 

sent to the receiver.

 

 

CH — Set the switches of

LEVEL ADJUST — Turn to

HI LEVEL AUDIO IN — Connect the surround

this channel selector to

adjust the sound quality.

or rear speaker outputs from your audio

choose one of six preset

 

source (A/V receiver or Home Theater

frequencies.

 

system) to these inputs using the supplied

 

 

speaker wire.

1.Power off the audio source or A/V receiver before making any connections.

If your audio source’s output uses stereo jacks connect the Left / Right LINE OUT from the audio source to the Left / Right LINE IN on the transmitter with stereo cables (not supplied). Match Left to Left and Right to Right.

If you use your A/V receiver or Home Theater as the audio source you can connect the surround (rear) speaker outputs to the transmitter’s HI LEVEL AUDIO IN with the supplied speaker wire. Match polarity (+ / –) and Left /Right appropriately.

2.Connect the supplied AC adapter’s barrel-shaped plug into the DC 9V jack, and then plug the transformer into a standard AC outlet.

3.Set the level adjust to the minimum.

4.Push STANDBY / ON /OFF to toggle between power on (the LED lights red) and standby (the LED lights green).

Ô NOTES Ô

Placement

•We have included a unique, adjustable stand designed to cradle either unit, both vertically and horizontally depending on what best adapts to your environment.

•You may find that reception is improved when the units are moved closer together, but not less than three feet apart.

•This system will not work properly from within an enclosed metal cabinet.

Connecting the Transmitter

•Power off the audio source, A/V receiver or Home Theater before making any connections.

•This system is not compatible with 6.1 systems.

3