OWNER’S MANUAL

2"

5.On the RadioShack 8-in-One Remote, select and press a desired key where the learned function will be stored. The IR segments will display an incoming animation, continue for three revolutions, and then the entire display will turn off.

After the display is off, press and hold the teaching key (on your orig- inal remote control) until the display (on the RadioShack 8-in-One Remote) turns on again.The bottom IR segment will flash twice when the code is successfully captured.

NOTE: If the bottom IR segment displays one long flash, a learning error has occurred. Try repeating this step again until a successful capture occurs.

If the function is still not captured, press twice to exit programming and review the “Learning Precautions” on page 19. If needed, also see “Troubleshooting” on page 43. After review, start programming again at step 1.

6.To learn other functions, repeat steps 3 through 5 as desired.

7.To exit programming, press twice. The display will return to the last-selected device menu screen.

DELETING A SINGLE LEARNED KEY

1.Press and hold P until the bottom IR segment flashes twice. The program keys will appear:

2.Press above IR DELETE once. The IR Delete programming screen will appear:

3.Press a device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD) for the mode where the learned key to be deleted resides. The selected device menu screen, including , will be displayed.

4.Press the learned key to be deleted twice. Upon deletion, the bottom IR segment will flash twice as confirmation. The program keys will appear again.

continued on next page...

Using Learning 21