8-IN-ONE REMOTE POWERED BY KAMELEON

USING KEYMOVER

RESTORING A SINGLE KEYMOVED KEY (CONTINUED)

2. Press below OTHER once. The Other programming screen will appear:

3.Using the number keys, enter 9 9 4. The bottom IR segment will flash twice.

4.Press the destination mode once where the keymoved key is stored. Then press the destination key twice. Upon key restoration, the bottom IR segment will flash twice as confirmation. The program keys will appear again.

5.If desired, repeat steps 2 through 4 to restore another key.

6.Exit programming by pressing once. The display will return to the last-selected device menu screen.

RESTORING ALL KEYMOVED KEYS IN A SINGLE MODE

1.Perform steps 1 through 3 of Programming Keymover on the previous page.

2.Press the destination mode twice where the keymoved keys are stored. Upon key restoration, the bottom IR segment will flash twice as confirmation. The program keys will appear again.

3.Exit programming by pressing once. The display will return to the last-selected device menu screen.

PROGRAMMING FAVORITE CHANNEL SCAN

In the CBL, SAT, TV, VCR, or AUX mode, the RadioShack 8-in-One Remote can store a list of up to 10 favorite channels, in any order, that will be immediately scanned when you press FAV SCAN once (see Using Channel Scan on page 32).

NOTE: Favorite channels can only be programmed for one mode. After program- ming, if FAV SCAN is pressed while in another mode, the remote control will start a normal channel scan instead (if applicable to the selected device).

30Using Keymover/Programming Favorite Channel Scan