OWNER’S MANUAL

2. Press below OTHER once. The Other programming screen will appear:

3.Using the number keys, enter 9 9 4. The bottom IR segment will flash twice.

4.For the source mode, press a desired device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD). For this example, press TV once. The selected source device menu screen, including , will be displayed.

5.For the source key, press a key to be moved once. For this example press VOL ▲ once.

6.For the destination mode, press a desired device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD). For this example, press DVD once. The selected destination device menu screen, including , will

be displayed.

7.For the destination key, press a key to be moved once. For this example press VOL ▲once. Upon keymoving, the bottom IR segment will flash twice as confirmation. The program keys will appear again.

8.Repeat steps 2 through 7 two more times to map the remaining volume control keys, substituting VOL▼and MUTE as source and destination keys in steps 5 and 7.

9.Exit programming by pressing once. The display will return to the last-selected device menu screen.

Upon completion of the above procedure, you can now use your RadioShack 8-in-One Remote to control the TV’s volume and mute in the DVD mode, as well as in the TV mode.

RESTORING A SINGLE KEYMOVED KEY

1.Press and hold P until the bottom IR segment flashes twice. The program keys will appear:

continued on next page...

Using Keymover 29