OWNER’S MANUAL

❶

❸

 

❷

1.Push forward on the battery compartment cover (on the back of the remote) and lift it off.

2.Slide the AAA batteries into the compartment as indicated by the polarity symbols (+ and –) shown above.

3.Align the cover with the compartment opening and slide it back into place.

4.If batteries are inserted correctly, the display will turn on and show all keys. If a key is not pressed after 7 seconds, the display will turn off.

NOTE: The batteries will need replacement if one of the following conditions occurs:

1.The top IR segment flashes five times after pressing a key.

2.The Tilt Switch (if enabled, see page 38) no longer activates the remote and only pressing a key turns on the display.

ABOUT THE FINDER TRANSMITTER

NOTE: If you do not plan to use the Finder Transmitter, store it away for future use and skip this section.

Included in the package is a Finder Transmitter that you can use to audibly locate a lost or misplaced RadioShack 8-in-One Remote. The unit also comes with double-sided “hook and loop” tape for use in mounting it on a TV cabinet side or other surface.

The Finder Transmitter requires a 9-volt battery for power. For best performance and longest life, we recommend using a RadioShack alkaline battery.

continued on next page...

Installing Batteries 5