A QUICK LOOK AT THE CONTROLS (Continued)
KEY FUNCTIONS
When a key is pressed, the IR segments will animate. Outgoing animation (see arrow) indicates the remote is sending IR signals to a selected device.
Incoming animation indicates the remote is receiving IR signals from a device being learned (see Using Learning on page 19).
During programming, the bottom IR segment flashes to confirm setup actions.
Press CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD once to select a device to control. The selected device key will animate to indicate it is currently active.Also see the Device Table on page 12.
After programming, press MY SYSTEM once to select your custom system controls. See Using My System Mode on page 32.
Use P to enable the programming screen.
In the CBL or SAT mode, use PAGE+ or PAGE- to page up or page down through channels in the program guide.
Press PWR once to turn on or off a selected device.
Use the navigation keys as follows:
Use MENU to display the your device’s main menu. In the TV, CD, or AUD mode, the selected device’s main menu screen will appear.
Use GUIDE to display your device’s program guide, or setup or program menu.
In the TV, CD, or AUD mode, the selected device’s main menu screen will appear.
Use INFO to display the current channel and program information.
Use EXIT to exit from your device’s guide or menu.
Use the cursor keys (▲ , ▼,▲ , or ▲) to navigate through the program guide and menu screens.
8A Quick Look At The Controls