Radio Shack 25-3090 owner manual +0&1952, Device and the Found New Hardware Wizard screen appears

Installing the Fax/Modem

(Recommended) and Specify a location. Enter F:\WinME where F is the CD drive.

6.Click Next. The following screen appears.

7.Verify the driver location and click Next. Windows ME automatically copies the driver and related files to the computer. The following screen appears.

8.Click Finish. The orange PW indicator on the fax/modem lights, indicating it is ready to use.

9.You can use your existing fax/modem program or the supplied SuperVoice software to send fax, email, or surf the Internet. (See “Installing SuperVoice” on Page 7.)

9+0&195":2"

1.Turn on your computer.

2.Flip up the phone line jack cover on the fax/modem and with locking tab facing up, insert one end of the supplied RJ-11 cable plug into the phone line jack until it clicks. Connect the other end to the telephone line wall jack.

3.Connect the fax/modem’s USB plug to your computer’s USB port, using the supplied USB extension cable if necessary. Windows XP recognizes the

device and the Found New Hardware Wizard screen appears.

4.Insert the supplied driver installation CD and select Install from a list or specific location (Advanced).

5.Click Next. The following screen appears.

6.Select Search for the best driver in these locations and Include this location in the search. Enter F:\WINXP (where F: is the CD-ROM drive).

7.Click Next. Windows XP searches and recognizes the device’s driver, then the Hardware Installation screen appears.

4