27 MHz RF Wireless Keyboard & Optical Mouse Combo
Thank you for purchasing your Compaq
Installing the Batteries
You can power the mouse with two AAA batteries, and the keyboard with two AA batteries.
1 Remove the compartment cover from both the keyboard and mouse.
2 Insert the AA batteries into the keyboard and the AAA batteries into the mouse. Be sure to match the polarity markings.
3 Replace the compartment covers.
CH1 / CH2
Reset button
Installing the Windows 98 Driver
Your mouse and keyboard work with Microsoft Windows 98/2000/Me/XP/NT. Except for Windows 98, they should work well without installing the driver. If you are using Windows 98, be sure to install the driver before connecting the keyboard and mouse.
1 Exit all open Windows applications.
2 Insert the supplied CD in your computer’s
3Follow the
CH1 / CH2
1 Connect the charger / receiver’s USB cable to your computer’s USB port.
2 Press CONNECT on the receiver. The receiver’s indicator lights green.
3 Press the reset key at back of the mouse and CONNECT on the keyboard.
4 Press CONNECT on the keyboard again. The keyboard enters the connecting state again, and the indicator lights green.
5 Press the reset button on the back of the keyboard. The receiver indicator light turns off.
When you change the channel or replace the batteries, you will need to repeat steps 2 and 3.
CONNECT
27 MHz RF Wireless Keyboard and Optical Mouse from RadioShack. This combo is specially designed for offices with up to 4096 ID codes for the keyboard and 2048 ID codes for the mouse, so you can use multiple sets in the same office at the same time. With a single USB connection you can connect both the keyboard and the mouse to your computer.
user’s guide | wireless keyboard |
wireless mouse | charger / receiver |
AC adapter | CD (drivers) |
2 AAA batteries (rechargeable
Recharging the Batteries
Connect one end of the supplied adapter to the charger/receiver’s DC port and the other end to a standard AC outlet. Place the mouse in the charging stand. The red LED lights when the batteries are charging. The green LED lights when charging is complete.
When the batteries in the mouse get low, the red LED on the mouse flashes if the mouse is in use. When the batteries in the keyboard get low, the battery indicator turns red.
Setting the Channel
The keyboard and mouse offer 2 channels, CH1 and CH2. The receiver automatically detects the mouse’s channel. If interference is caused by the other computers, reset the channel.
To reset the channel on the keyboard, slide CH1 / CH2 on the back of the keyboard. To reset the channel on the mouse, remove the battery compartment on the mouse, and use a pointed object to slide the switch inside the compartment to CH1 or CH2. Then replace the cover.
If you change the channel on the mouse, you will need to press CONNECT on the receiver and the mouse.
Changing the ID Code
To avoid interference with other Windows desktop sets, you will need to change the ID code.
1 Use a pointed object to press the reset button on the back of the mouse and press CONNECT on the right top of keyboard to change the code.
2 Press CONNECT on the receiver.
DC port | CONNECT |
Please read this user’s guide before
installing, setting up and using your new product
www.radioshack.com
If you change the channel on the keyboard, the channel will be automatically detected.
3 Press the reset key on the back of the mouse.
