Radio Shack 3-in-One Pocket Remote owner manual Operation, Punch-Through

15-1930.fm Page 8 Monday, July 19, 1999 1:09 PM

OPERATION

1.Press the device key for the device you want to control, then point the remote control at the device and press PWR to turn the device on.

2.Repeat Step 1 for all other devices you want to operate.

3.Point the remote control toward the device you want to control, then press the appropriate device key and the desired command keys.

Note: The command keys on the remote control work the same as the keys on the original remote control; however, the labeling might dif- fer slightly.

4.To turn off the last device you selected, press PWR. To turn off other devices, press the device key for the device you want to turn off, then press PWR.

PUNCH-THROUGH

The punch-through feature lets you alternately con- trol two different devices without pressing the device keys for each one. Here’s how it works.

Not all of the remote control’s keys are used by every device. For example, a TV is often the only device that uses the volume keys. After you press TV, then press VCR, you can still use the volume control to control the TV.

Note: The punch-through feature might not work if the last two devices you selected have the same (or similar) features. For example, most TVs and some cable converters have channel select keys on their remote controls.

Need help? Call 1-888-533-7135

8

Need help? Call 1-888-533-7135

8