Audio/Video Receiver
Pro-Series
Refer to your Owner’s Manual for complete instructions.
Connecting A/V Components
• Use a video cable to connect MONITOR OUT on this receiver to a TV’s VIDEO IN
(as shown in the diagram.)
• You can use either a coaxial or an optical cable to connect a DVD player to this receiver as shown in the diagram.
• In order to save time connecting your system for surround sound, use the receiver’s default settings.
Placing the Speakers
•Place the center speaker directly above or below the TV so that the sound of the center channel is localized at the TV.
•If possible, place the surround speakers slightly above ear level.
•Try to place all the speakers at an equal distance from the listening position.
INSTALLING BATTERIES IN THE REMOTE
The remote requires two AA batteries (not supplied).
•Dispose of old batteries promptly and properly.
•Do not burn or bury batteries.
•Use only fresh batteries of the required size and recommended type.
•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.
•If you do not plan to use the remote for several months, remove the batteries. Batteries can leak chemicals that can destroy electronic parts.
Connecting Speakers
Ω
to 16 Ω.•The receiver will work with just two stereo speakers (FRONT), but using at least three speakers (2 FRONT and a CENTER) is recommended, and a complete setup of six speakers (as shown) is best.
•Make sure you connect the speaker on the right to the RIGHT terminal and the speaker on the left to the LEFT terminal.
•Make sure to match the positive and negative
•If you are not using a subwoofer, change the front speaker setting to large. (See “Speaker Setting” on page 34 of your Owner’s Manual.)
RadioShack Corporation Fort Worth, Texas 76102
© 2003 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.