7
Note: Experiment with the receiver’s volume setting and
the settings of other components in your audio system to
obtain the best results.

Using the Standby Setting

The microphone’s STBY setting lets you turn off the
microphone without turning off the microphone’s
transmitter.
If you move the switch from ON or STBY to OFF while your
amplifier is on, there is a loud pop. There is no pop when
you move the switch from STBY to ON, or from ON to STBY.
To conserve battery power, be sure to set the switch to OFF
when you finish using the microphone.
SPECIFICATIONS
Sensitivity......................................................100 dB SPL @ ± 7 kHz FM
Frequency Response....................................................100 – 10,000 Hz
RF Output Power.............. ................................................. 50 mW (Max)
Current Consumption.......................................... ..........30 mA (Average)
Battery Life (Alkaline)........................................ ..........8 Hours (Average)
Dimensions (Diameter × Length)...............................23/8 × 911/16 Inches
(61 × 246 mm)
Operating Frequencies
Channel........................................................................Frequency (MHz)
A................................................................................ ..................169.445
B................................................................................ ..................169.505
C.................................................................................................. 170.245
D.................................................................................................. 170.305