![](/images/new-backgrounds/1149076/14907621x1.webp)
The Basics
5.Slowly slide up the channel volume control (CH) until you get a reading of up to 0 dB on both LED meters.
6.Stop playback of the selected input source.
7.Repeat steps
Notes:
•Write down the CH setting for each audio source. Then, when you want to mix that source, you can adjust its volume to that setting.
•If it was necessary to set CH 1 to maximum to get a reading of 0 dB or less on the LED meter, slide CH 1 down to about 8 and adjust MASTER upward until you get a reading of 0 dB on both LED meters. If that does not work, set GAIN midway and rotate MASTER clockwise until you get a reading of 0 dB on the LED meters.
presetting microphone(s)
1.If your microphone has an ON/OFF control, turn it ON. Otherwise, set DJ MIC LEVEL or AUX LEVEL to 0.
DJ MIC LEVEL AUX LEVEL
11