TROUBLESHOOTING
We do not expect you to have any problems with your headphones, but if you do, the following suggestions might help.
Problem | Solution |
|
|
|
|
No sound | Be sure the headphones are turned on. |
|
|
| Charge the headphones' batteries. |
|
|
| Be sure the AC adapter is plugged in and has power. |
|
|
| Be sure all cables are connected securely. |
|
|
| Be sure the audio source is turned on and tuned to an |
| active channel. |
|
|
| If you have connected the transmitter to jacks that are |
| controlled by the audio source's volume control, be sure |
| the source's volume control is turned up. |
|
|
| If the stereo indicator on the right earpiece is not on, |
| adjust TUNE on the right earpiece until it turns on. |
|
|
| Adjust the headphones' volume control. |
|
|
| Change the position of the transmitter. |
|
|
Distorted audio | If the STEREO indicator on the right earpiece does not |
| light steadily, adjust TUNE on the earpiece until it turns |
| on. |
|
|
| Rotate FREQ ADJUST on the transmitter, then adjust |
| TUNE on the right earpiece until the STEREO indicator |
| on the earpiece lights steadily. |
|
|
| If you connected the transmitter to an audio source’s |
| headphone jacks, reduce the audio source’s volume. |
|
|
| Charge the headphone's batteries. |
|
|
| Change the position of the transmitter. |
|
|
| Adjust the LEVEL control on the transmitter so the level |
| indicator flashes only occasionally. |
|
|
If you still have problems, take the headphones to your local RadioShack store for as- sistance.
9
