Unidirectional Dynamic Microphone
OWNER’S MANUAL — Please read before using this equipment.
Your RadioShack Unidirectional Dynamic Mi- crophone delivers acoustic clarity and accu- racy. The pickup pattern controls feedback, reduces pickup of undesired signals, and provides increased sensitivity. Use your mi- crophone for
Its other features include:
Microphone Holder — swivels so you can easily adjust the microphone’s position.
OPERATION
Note: To prevent feedback, make sure the microphone's ON/OFF switch is set to OFF before connecting it to a PA or recording sys- tem.
1.Plug the microphone's
mm)plug into the microphone jack on your PA or recording system.
2.Turn on your PA or recording system.
3.Set ON/OFF to ON to turn on the micro- phone. When you finish using the micro- phone, set ON/OFF to OFF.
CARE
To enjoy your Unidirectional Dynamic Micro- phone for a long time:
•Keep the microphone dry. If it gets wet, wipe it dry immediately.
•Use and store the microphone only in normal temperature environments.
•Handle the microphone gently and care- fully. Do not drop it.
•Keep the microphone away from dust and dirt.
Modifying or tampering with the micro- phone’s internal components can cause a malfunction and might invalidate its warranty. If your microphone is not performing as it should, take it to your local RadioShack store for assistance.
USING THE MICROPHONE HOLDER
To use the supplied microphone holder with your microphone, screw it onto the top of a microphone stand (not supplied), then slide the microphone into the larger end of the holder.
Mounting on a Stand
| Screw | mi- |
| crophone | |
| holder onto | |
Microphone Holder | stand | in a |
| clockwise | |
| motion. | |
© 2000 Tandy Corporation. All Rights Reserved. RadioShack and RadioShack.com are trademarks used by Tandy Corporation.
