Radio Shack 40-1034 specifications InchPolypropylene Woofer, Connection, Installation

Cat. No. 40-1034

12-Inch Polypropylene Woofer

Your RadioShack 12-Inch Polypropylene Woofer brings great bass response to your stereo or monaural sound system, at home or in your car.

Its features include:

Light, Rigid, Polypropylene Cone — extra-durablelong-life cone resists moisture and temperature ex- tremes, and withstands greater stress at high volume lev- els.

Rolled Urethane Foam Surround — minimizes distor- tion and improves clarity.

Long-Throw Voice Coil — delivers clean, solid sound.

CONNECTION

Follow the diagram to connect the speaker.

Note: If you want to connect a midrange and a tweeter, you must also connect a crossover network (available at your local RadioShack store).

INSTALLATION

Use the speaker as a template, mark a mounting hole 1 inch in diameter less than the speaker’s outer diameter, then cut the hole in the mounting surface.

Install the speaker from the cabinet front (with the termi- nals at the bottom of the speaker) and keep it flush with the baffle face. Secure the speaker with eight screws (not supplied).

SPECIFICATIONS

Impedance	8 Ohms
Frequency Response	30 Hz–3,000 Hz
Free Air Resonance	30 Hz
Power Handling	75 Watts RMS
Input Power	150 Watts (Maximum)
Sensitivity	88 ±2 dB/1w/1m
Cone Material	Polypropylene
Dimensions (HWD)	515/16 × 123/16 × 123/16 Inches
	(15 × 31.1 × 31.1 cm)
Magnet Weight	17.8 oz (504 g)
Speaker Weight	71.8 oz (2 kg)

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

© 1999 Tandy Corporation.

All Rights Reserved.

RadioShack is a registered trademark used by Tandy Corporation.