10” PA Speaker

40-210

Setting Up and Using Your Speaker

Placing Your Speaker

Place your speaker in the desired location on a flat, hard surface. Do not hang it.

Rear of sample amplifier

Connecting Your Speaker

BEAUTY SHOT

Specifications

Power Handling

75 W RMS

 

160 W Max Power

Unit Dimensions..... 17 1/2 x 12 9/16 x 9 3/16

Frequency Response

50 - 20,000 Hz

Impedance

....8 ohms

S.P.L.(1 Watt/1Meter)

92 +/-2 dB

Specifications are typical; individual units may vary. Actual product may vary from the product images shown in this document.

Care

Using the Speaker Terminals

1.Connect one pair of speaker wires

(not supplied) to the color-coded connectors on the back of the speaker, and match the connectors to your amplifier.

Or, you can use more than one speaker. This results in an 8-ohm load on the amplifier. If you connect a second speaker in series, the load increases to 16 ohms. If you connect a second speaker in parallel, the load decreases to 4 ohms. Check your amplifier’s specifications to determine the best connection.

2.To insert the speaker wire, press down on the red or black push-release button and insert the tip of the speaker wire.

Using the Mono Plug

Plug the 1/4-inch Mono plug (not supplied) into the MONO jack on rear of the speaker, and plug the other end into your amplifier’s OUTPUT jack.

Operation

MONO plug

Push-release

button

Keep your speaker dry; if it gets wet, wipe it dry immediately. Use and store your speaker only in room temperature environments. Handle your speaker carefully; do not drop it. Keep your speaker away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

Caution: You might permanently damage your speakers by cleaning them with a vacuum cleaner. Use a feather duster or a soft, loose cloth instead.

Limited 90-Day Warranty

This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of pur- chase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROP- ERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above lim- itations or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expira-

Adjust the audio source’s volume to the desired listening level.

Cautions:

Do not use the speaker terminals and Mono plug connection at the same time.

To protect your hearing, set the audio source’s volume to the minimum level.

Make sure the audio source’s power is turned off.

tion of the warranty period.

This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to fol- low instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those pro- vided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state

RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102

12/99

©2004. RadioShack Corporation.

40-210

All Rights Reserved.

Printed in China

RadioShack and RadioShack.com are

04A04

trademarks used by RadioShack Corporation.

 

Page 1
Image 1
Radio Shack 40-210 specifications Setting Up and Using Your Speaker, Specifications, Care

40-210 specifications

Radio Shack 40-210 is a versatile and widely recognized product in the realm of electronics. Known for its reliability and user-friendly interface, this device has garnered attention from both amateur and professional radio enthusiasts. The 40-210 is primarily a versatile multimeter that boasts several main features, technologies, and characteristics that enhance its appeal.

One of the key features of the Radio Shack 40-210 is its digital display, which allows users to read measurements easily and accurately. The device typically measures voltage, current, and resistance, making it a valuable tool for troubleshooting electrical systems. With its ability to display both AC and DC voltage measurements, the multimeter is ideal for various applications – from simple household repairs to more complex electronics projects.

Another prominent characteristic of the Radio Shack 40-210 is its user-friendly design. The buttons and dial are strategically placed for ease of use, even for those who may not have extensive technical knowledge. This design aspect ensures that users can quickly adapt to the multimeter, allowing them to tackle projects with confidence.

The Radio Shack 40-210 also features a durable build. Constructed to withstand everyday wear and tear, the multimeter is designed for longevity. The casing is often made from high-quality plastic, providing a robust exterior that can resist impacts and environmental factors.

Additionally, the 40-210 is equipped with advanced measurement technologies, allowing for precise readings. It may feature auto-ranging capabilities, which automatically select the correct range for measurements, making it suitable for a wide range of tasks. This functionality saves users time and minimizes errors during the measurement process.

Moreover, the multimeter often includes a hold function, permitting users to freeze measurements on the display, which is essential for taking notes or recording data. Some models may even offer additional functions, such as diode testing or continuity checking, broadening its usability in various applications.

In summary, the Radio Shack 40-210 stands out as a reliable and efficient multimeter, known for its digital display, user-friendly design, durability, and advanced measurement technologies. Whether you're a hobbyist working on DIY electronics or a professional tackling complex projects, the Radio Shack 40-210 is a valuable tool that can meet your needs with precision and ease. Its combination of features ensures that it remains a popular choice in the world of electronics testing and diagnostics.