Limited Two-Year Warranty

This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for two (2) years from the date of purchase from RadioShack company- owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack

MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PAR- TICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED

3.Using a wire stripper, remove about 1/4 inch of insulation from each wire. Then twist the ends of each wire.

4.Connect the marked wire to a red speaker terminal by pressing the release tab, inserting the wire into the hole, and then releasing the tab. Repeat this

procedure to connect the unmarked wire to the black terminal.

5.Connect the marked wire coming from the speaker to the left channel of the receiver's positive (+) terminal. Then connect the unmarked wire to the left channel of the amplifier's negative (–) terminal.

WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RE- SPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, IN- CLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF Ra- dioShack HAS BEEN ADVISED OF THE POSSIBIL-

ITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack

/1706+0)"6*'"52'#-'4

1.Remove the grille to expose the mounting screws.

2.Be sure the mounting tabs are turned in, allowing the speaker to fit into the hole. Then insert the speaker into the mounting hole.

3.Use the four screws to tighten the mounting tabs to the wall or ceiling. Be careful not to overtighten the screws.

4. Replace the grille.

Mounting

Tabs

To remove the speaker from the wall or ceiling, loosen the screws only far enough to remove the speaker. This will prevent loss of the mounting tabs.

store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product re- pair without charge for parts and labor; (b) replace the product with one of the same or similar design; or

(c)refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or recondi- tioned parts and products may be used in the perfor- mance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, acci- dent, misuse, improper or abnormal usage, failure to follow instructions, improper installation or mainte- nance, alteration, lightning or other incidence of ex- cess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries;

(d)cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, in- stallation, set-up service adjustment or reinstallation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

RadioShack Customer Relations, 200 Taylor Street,

6th Floor, Fort Worth, TX 76102

12/99

52'%+(+%#6+105

Resonance Frequency

................................................................................................................ 55 Hz ±20%

Frequency Response

35 Hz through 22 kHz

Power Rating

50 Watts RMS, 100 Watts Max.

Impedance (nominal)

8 Ohms

Sensitivity

86 dB ±3 dB

Voice Coil

1 in. (25 mm)

Voice Coil (Tweeter)

1 in. (25 mm)

Magnet Size (Woofer)

13 oz

The plastic enclosure for this speaker meets UL 94 requirements for flammability.

Specifications are typical; individual units may vary. Specifications are subject to change or improvement without notice.

RadioShack Corporation

40-4094

03A02

Fort Worth, Texas 76102

Printed in China

Page 2
Image 2
Radio Shack 40-4094 owner manual 1706+06*52#-4, 52%++%#6+105

40-4094 specifications

The Radio Shack 40-4094 is a versatile and compact multifunctional device primarily recognized for its role as a directivity meter. This device is particularly popular among amateur radio enthusiasts and professionals in the telecommunications industry due to its ease of use and comprehensive features.

One of the standout features of the Radio Shack 40-4094 is its ability to measure signal strength accurately. The device is equipped with an impressive analog needle meter, which allows users to gauge received signals efficiently in real-time. This is especially beneficial when setting up antennas, where knowing the precise strength and quality of the signal can make a significant difference in performance.

The Radio Shack 40-4094 works across various frequency ranges, making it suitable for multiple applications. The device covers HF, VHF, and UHF bands, giving users the flexibility to work with different types of radio frequencies. This wide-frequency capability ensures that the 40-4094 can be used not just for amateur radio but also for various communication technologies including public safety communications, commercial radio, and even emergency services.

In terms of design, the 40-4094 sports a robust build, ensuring it can withstand the rigors of fieldwork. Its compact size makes it incredibly portable, while the intuitive layout of its controls allows users to operate the device effectively with minimal prior instruction. The rotary dial enables quick adjustment to various settings, while the clear display ensures readability even in low-light conditions.

Moreover, the 40-4094 is equipped with a low battery indication feature, minimizing the chances of unexpected shutdowns during critical measurements. Battery-powered convenience adds to its portability, making it ideal for outdoor use where power sources may be limited.

In conclusion, the Radio Shack 40-4094 is a powerful tool for those in the field of radio communications. Its reliable performance, multifunctionality, and user-friendly design make it a must-have for both avid hobbyists and professionals alike. By combining essential features and practical applications, this device stands out as an excellent choice for enhancing the experience of radio signal analysis and measurement.