Big Button Cordless Phone with Headset Jack
43-3576
Quick Start Guide
for installing, setting up and using your new product
Install and Charge
the Handset Battery
1. | Press down and |
| Connector |
| slide off the battery |
| |
| cover. | Battery |
|
|
|
| |
2. | Remove the battery | Pack |
|
| pack and plug the | Cover |
|
| battery pack’s |
|
|
| connector into the |
|
|
| socket in the battery |
|
|
| compartment (fits |
| Socket |
| only one way). Replace | ||
the battery pack and the cover.
3. Insert the AC adapter’s barrel plug into the base’s DC IN 9V jack on the back of the base, and
route the excess | Base |
cord through the |
|
strain relief slot. |
|
Plug the adapter |
|
into a wall outlet. |
|
4. Place the |
|
handset on the |
|
base and charge | DC IN 9V |
continuously for | Jack |
Strain Relief Slot |
before using the phone.
Using Your Phone
Connect to a Phone Line
When the handset battery pack is fully charged, plug the telephone cord into the TEL LINE jack on the back of the base. Plug the other end into a telephone wall jack.
TEL LINE
Wall | Jack |
| |
Jack |
|
Wall Bracket
Note: The illustration shows the
Your phone is set for tone dialing. If your phone uses pulse service, please see “Choosing the Dialing Mode” on page 12 in your Owner’s Manual.
Making Calls
Pick up the handset and press TALK. Listen for the dial tone, and then dial the number. Or, dial the number and then press TALK.
Answering Calls
If Auto Talk is on, just pick up the handset from the base. If Auto Talk is off, pick up the handset and press TALK. For more information, see “Setting Menu Options” on page 16 of your Owner’s Manual.
If the handset is off the base, press TALK, or, with Auto Talk on, press any number, ∗/TONE/f or #/g.
©2004 RadioShack Corporation. | |
All Rights Reserved. | Printed in China |
RadioShack and RadioShack.com are | 04A04 |
trademarks used by RadioShack Corporation. | UCZZ69434BZ |
