![Illus.](/images/new-backgrounds/55583/5558315x1.webp)
3.Line up the keyhole slots on the back of the alarm with the screws, then slide the alarm down onto the screws to secure it.
4.Remove the bat- tery compartment cover and the bat- tery. Then thread
a screw into hole | Illus. |
|
C inside the com- partment. Rein- stall the battery and replace the cover.
5.Use the two remaining screws to mount the magnet so its arrow points toward one of the engraved lines on either side of the alarm.
8