Radio Shack 63-1037 owner manual +056#..+0 $#664+5, 124#6+10, 1706+0, 4566+06*556, 6+0#.1%#6+10

www.radioshack.com™

OWNER’S MANUAL —

Please read before using this equipment.

Wall Mount Holder — Use to mount the thermometer on a wall.

Removeable Stand — Use to set thermometer on a table or other flat surface.

Channel 1/2/3 — Slide to Channel 1, 2, or 3. Set to a different channel than the other remote sensors you are using.

y— Appears if the batteries are weak.

P O
O L	S P A

WIRELESS THERMOMETER

9KTGNGUU"2QQN15RC"6JGTOQOGVGT

63-1037

Liquid Crystal Display — The current temperature and selected channel appear.

Temperature Sensor Probe — Place it in water to test the temperature.

°C / °F — Select Centigrade (°C) or Fahrenheit (°F) for your desired degree format.

±"016'"±"

Operation

•Do not set two or more thermometers to the same channel when using them with one main unit. Otherwise you will unable to judge which thermometer the digits represent.

•Your thermometer comes with a protective film covering the display which should be removed before use.

Selecting a Location

The construction of your home or office might affect the transmission range between the main unit and the thermometer. If you have a choice of several locations, try each to see which provides the best performance.

R"9#40+0)"R

Dispose of old batteries promptly and properly. Do not burn or bury them.

."%#76+10".

•Use only fresh batteries of the required size and recommended type.

•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

•If you do not plan to use the thermometer for a month or more, remove the batteries. Batteries can leak chemicals that can destroy electronic parts.

Thank you for purchasing the RadioShack Wireless Pool/Spa Thermometer. Your thermometer measures water temperature, and is useful in swimming pools, hot tubs, and freezers. It is for use with an in/out thermometer (not supplied, available at your local RadioShack store or online at www.radioshack.com). The supplied wall mount holder and stand let you mount it wherever you like.

+056#..+0)" $#66'4+'5

Your thermometer requires two AA batteries (not supplied) for power. For the best performance and longest life, we recommend RadioShack alkaline batteries.Rý.

1.Remove the wall-mount holder from the back of the thermometer.

2.Use a Phillips screwdriver to loosen the screws on the battery compartment

cover and remove the cover.

°C/°F

RESET

CHANNEL 1/2/3

Battery

Compartment

Cover

3.Slide CHANNEL 1/2/3 to the desired setting, then press RESET. The selected channel appears on the display.

4.Slide °C/°F to the desired setting.

5.Place two batteries in the compartment as indicated by the polarity symbols (+ and –) marked inside.

6.Replace the cover and secure it with the screws. Rý

12'4#6+10

Place the temperature sensor probe where you want to test. The current temperature and selected channel appear. Signals transmit to the main unit about every 30 seconds. ±

4'5'66+0)"6*'"5;56'/

If your thermometer stops working properly, use a pointed object to press RESET. This resets the temperature and reinitializes the sensor transmitter.

/1706+0)

Place your thermometer on a flat surface using the supplied stand, or mount it on the wall using screws (not supplied) and the supplied holder.

5'.'%6+0)"#".1%#6+10

Choose an indoor or outdoor location for your thermometer that is within 60 – 90 feet (20 – 30 meters) of the main unit. ±

#"+/2146#06"#

If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for pertinent information.

Rý— Warning # — Important ±— Note .— Caution ° — Hint

© 2002 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks used by

RadioShack Corporation.