to positive and its plug must fit the compass' jack. Using an adapter that does not meet these specifications could damage the compass or the adapter.
•Always connect the DC adapter to the compass before you connect it to the power source. When you finish, disconnect the adapter from the power source before you disconnect it from the compass.
Note: Since not all vehicles have constant power supplied to the power outlet, two AAA batteries are required to retain the compass calibration settings in memory (although they do not power the compass when vehicle battery power is used).
Insert the barrel plug of the 12V DC adapter (not supplied) into the DC12V jack on the back of the compass. Then insert the DC plug into your vehicle’s power outlet.
MOUNTING THE COMPASS
Choose a clean mounting location on the vehicle’s windshield where the compass is at least 5 inches away from any stereo speakers and will not obstruct the driver’s field of view.
Your compass comes with three suction cups for secure mounting.
1.Insert the small ball head of each suction cup into the larger hole on the bottom of the bracket and slide it into the bracket’s smaller hole so it fits tightly.
2.Place the compass in the holder.
Note: To remove the compass from the holder, simply slide it out.
3