MEMORY DIALING
You can store up to 20 numbers in memory (15 digits each in the tone mode, 16 in the pulse mode), then dial a stored number by pressing a memory button.
Note: Entering a pause counts as one digit in memory.
Storing a Number in Memory
Note: Leave the handset in its cradle when storing a number.
Important:
•If you attempt to store a number while the BATT TEST indicator is not lit, all stored numbers are deleted.
•If BATT TEST does not light or is dim, replace the batteries. See “Testing/Replacing the Batteries” on Page 5.
•Do not attempt to store a telephone number with no batteries or weak batteries.
1.Be sure MODE is set for the type of service you have.
12
2.Set NORM/STORE BATT TEST to STORE BATT TEST. The BATT TEST indicator lights.
3.Enter the number and any pause entries.
4.Press the memory button for where you want to store the number and write the person’s or company’s name on the supplied Memory Index Card. (Use a pencil in case you want to change the number later.).
Repeat Steps 3 and 4 for each num- ber you want to store.
5.When you finish storing numbers, return NORM/STORE BATT TEST to NORM.
