Radio Shack ET-2105 manual Using Mute, Using Flash, Using Tone Services on a Pulse Line

Using Mute

To talk to someone else in the room without the person on the oth- er end of the phone line hearing your conversation, press MUTE. Press MUTE again to resume your phone conversation.

Using Flash

FLASH provides the electronic equivalent of a switchhook signal for special phone service such as Call Waiting.

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have any special phone services, pressing FLASH might disconnect your current call.

Using Tone Services on a Pulse Line

Some special services, such as bank-by-phone, require tone sig- nals. If you have pulse service, you can still use these tone servic- es by following these steps:

1.Dial the service’s main number.

2.When the service answers, press TONE/∗ . Any additional numbers you dial are sent as tone signals.

3.After you complete the call, press TALK or return the keypad to the base. The phone automatically resets to pulse dialing.

14