Radio Shack owner manual ET-3204 Translucent Desktop Neon Fashion Phone, Features

ET-3204 Translucent Desktop Neon Fashion Phone

OWNER’S MANUAL — Please read before using this equipment.

FEATURES

„ Flash	„ Adjustable Ringer
„ Redial	„ Handset Volume Control
„ Reset	„ Hearing Aid Compatible
„ Neon Light

WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.

CAUTION	!
RISK OF ELECTRIC SHOCK. DO NOT
OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER OR BACK. NO

USER-SERVICEABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.

This symbol is intended to inform you that

!instructions are included in the literature accompanying this product.important operating and maintenance

READ THIS FIRST

We have designed your telephone to conform to federal regulations and you can connect it to most telephone lines. However, each device you connect to the phone line draws power from it. This power draw is the device’s Ringer Equivalence Number, or REN. The REN is on the bottom of your phone.

If you are using more than one phone or other device on the line, add up all the RENs. If the total is more than five (or three in rural areas) your phones might not ring. If ringer operation is impaired, remove one of the devices from the line.

If your phone causes problems on the phone line, the telephone com- pany can disconnect your service. The phone company tries to notify you in advance. If advance notice is not practical, the telephone com- pany notifies you as soon as possible and advises you of your right to file a complaint with the FCC.

The phone company can also make changes to its lines, equipment, operations, or procedures that could affect the phone’s operation. The phone company notifies you in advance, so you can take the neces- sary steps to prevent interruption of your phone service.

FCC STATEMENT

Your telephone complies with Part 68 of the FCC Rules. You must, upon request, provide the FCC registration number and the REN to your telephone company. Both numbers are on the bottom of your phone.

Note: You must not connect your telephone to:

•coin-operated systems

•party-line systems

•most electronic key phone systems

CONNECTING THE PHONE

Cautions:

You must use a Class 2 power source that supplies 9V

!DC and delivers at least 200 mA. Its center tip must be set to positive and its plug must fit the phone's DC 9V

jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the phone or the adapter.

•Always connect the AC adapter to the phone before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the phone.

Notes:

•The adapter powers the light.

•The USOC number of the jack to be installed is RJ11C.

DC 9V	Line
Jack	Cord

Plug one end of the supplied line cord into the jack on the back of base, and plug the cord's other end into a modular phone line jack. In- sert the supplied AC adapter's barrel plug into the DC 9V jack on the back of the phone. Then plug the other end of the adapter into a stan- dard AC outlet.

© 2000 Tandy Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks used by Tandy Corporation.