MOUNTING THE PHONE
Desk Mounting
Wall Mounting
(With or Without Wall Plate)
USING THE PHONE
Adjust the receiver’s volume as desired.
Switch to TONE or PULSE to match the type of service you have. If you have pulse service, you can switch to TONE during a call to use tone services.
Handset Holder
(Wall Mounting)
Note: The USOC number of the jack to be installed is RJ11C (RJ11W for a wall jack).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to inform you that parts inside the telephone present a risk of electric shock.
Press for special services.
Press to end a call.
Switch the ringer to sound or not to sound. You can still make calls with the ringer off, and you can receive calls if you hear another phone on the same line ringing.
Press to end a call without hanging up the handset.
Press to dial the last number dialed (up to 31 tone or 32 pulse digits).
Plug the handset cord into the jacks on the base and handset.
This symbol is intended to alert you to important operating and servicing instructions included in the papers with the telephone.
©1997 Tandy ÐÐCorporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
