Radio Shack 43-3228, ET3228 Preparation, Selecting a Location, Mounting the Phone, On a Desktop

protection circuits meet or exceed the FCC re- quirements. However, lightning striking the telephone or power lines can damage your telephone.

Lightning damage is not common. Neverthe- less, if you live in an area that has severe electrical storms, we suggest you unplug your phone when storms approach to reduce the possibility of damage.

WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.

CAUTION	!
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the presence of uninsu- lated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to con- stitute a risk of electric shock. Do not open the product’s case.

This symbol is intended to inform you that important operating and ! maintenance instructions are included in the literature accom-

panying this product.

PREPARATION

Selecting a Location

Select a location for your telephone that is:

• Near a telephone jack

•Not in the way of normal activities in the area

Your telephone connects directly to a modular telephone line jack. If your telephone wiring does not have a modular jack, you can update the wiring yourself using jacks and adapters (available at your local RadioShack store), or have the telephone company update the wir- ing for you. You must use compatible modular jacks that are compliant with Part 68 of FCC Rules.

Note: The USOC number of the jack to be in- stalled is RJ11C (or RJ11W for a wall plate jack).

Mounting the Phone

You can mount your telephone on a wall plate, directly on a wall, or place it on a shelf, desk or table.

On a Desktop

Use the supplied mounting bracket as a stand when you place the phone on a desk, shelf, or table.

1.Insert the mounting bracket’s two smaller tabs into the matching slots near the key- hole slot on the underside of the phone’s base. Then press down on the bracket until its larger tabs snap into place.

2.Plug one end of the supplied long modu- lar cord into the LINE jack at the back of the base.

3.Plug the cord’s other end into a modular phone line jack.

On a Wall Plate or Wall

1.Insert the mounting bracket’s two smaller tabs into the matching slots opposite the keyhole slot on the underside of the phone’s base. Then press down on the bracket until its two larger tabs snap into place.

2