3.Insert the microcassette into the door’s guides so the microcassette’s open edge faces out.
Note: The arrow on the cassette compartment door indicates tape travel direction. Be sure the tape’s full reel is in the opposite direction of the arrow.
4.Close the cassette compartment door.
RECORDING
When you use the VOX feature, recording begins when the recorder picks up sound and stops a few seconds after the sound stops.
The VOL/VOX setting determines the sound level that activates the VOX circuit and starts recording. At higher settings, a softer sound starts VOX recording. At low- er settings, a louder sound starts VOX re- cording. Use a low VOL/VOX setting in a
Note: You can monitor the sound level by connecting an optional earphone.
1.Load the microcassette tape.
Operation11