DISC NOTES
DISC PLAY: Cleaning discs
Before playing, clean the disc with a clean,
NOTE:
Do not use so solvents such as benzine, thinners. Commercially available cleaners or anti static spray damage the unit.
Insert a disc with the label surface down. Doing so may damage the unit. NOTE:
Do not try to insert another disc when one has been already inserted. Doing so may damage the unit.
Handle the disc by its edge. And to keep the disc clean, do not touch the surface. Do not stick paper or tape on the disc.
Do not expose the disc to direct sunlight or heat sources such as hot air ducts. Or leave it in a car parked in direct sunlight where there can be a considerable rise in temperature.
Label 
surface up
Preparing the Remote Control
Inserting the Batteries
1.Open the battery compartment cover.
2.Insert the new batteries.Make sure that the positive and negative terminals of thebatteries are oriented indicated.
3.Close the cover
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal receiver).
Operation angle: About ± 30 degree in each the direction of the front of the IR mark.
9
