Radio Shack PRO-90 Connecting The Antenna, fm Page 11 Wednesday, August 4, 1999 306 PM

20-520.fm Page 11 Wednesday, August 4, 1999 3:06 PM

When you finish using the DC cigarette-lighter power ca- ble, disconnect it from the cigarette-lighter socket, then disconnect it from your scanner.

Note: If the scanner does not operate properly when you connect a DC cigarette-lighter power cable, unplug the power cable from the cigarette-lighter socket and clean the socket to remove ashes and other debris.

CONNECTING THE ANTENNA

Follow these steps to attach the supplied flexible anten- na to the connector on the top of your scanner.

1.Align the slots around the antenna’s connector with the tabs on the scanner’s BNC connector.

2.Slide the antenna’s connector down over the scan- ner’s connector and rotate the antenna connector’s outer ring clockwise until it locks into place.

11