Operating Procedures
OUTPUT | RISK OF ELECTRIC SHOCK |
| DO NOT OPEN |
REMOTE SYSTEM |
|
TO AMP | INTEGRATED CIRCUIT |
| AC 220V~230V 50Hz |
AUD IO
IN | EQ | CD |
FM |
|
75 Ω | R EC |
| EQ |
AM | PLAY |
LO O P |
|
| R EC |
REMOTE SYSTEM
PLAY
AUX CD IN
Operating Procedure
Switch on the Amplifier.
Select “CD” from function selection column at the Amplifier, relative light will be seen when selected. Turn on the CD player by press the POWER Switch (1). Press the OPEN/CLOSE button. The disc tray will slide out. When it has opened fully, place a compact disc carefully in the tray.
**Note**
a). Always place the compact disc in the disc tray with the label facing upward.
b). The CD tray accepts two different sizes of disc: 120mm & 80mm.
To close the disc tray, press the OPEN/CLOSE button again. When the tray is securely closed the disc will start turning automatically and the total number of selections and the total disc time will be counted. A few seconds later the Play indicator will light, and the TRACK NO. and TIME counter will show “10:00”.
Press the PLAY/PAUSE button. Playback will start, the PLAY indicator “►” will go on.
When playback of the last track is finished, the CD player head will return to the beginning of the first track, and the TRACK NO and TIME counters will show “00:00”.