2. Insert the supplied power adapter’s barrel plug into the DC 12V jack on the back of the base.
| DC12V | LINE |
T P |
|
3.Route the modular cord through the groove on the bottom of the base and the adapter cord through the strain relief slot on top of the base.
Strain Relief Slot
Groove
4.Plug the adapter into a standard AC outlet.
5.Plug the short modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
LINE
OFF
RINGER
ON
6.Fully extend the base’s antenna and place it in a vertical position.
7
