Radio Shack TRC-239 Preparation, Powering the CB, Using the Power Jack and NI/AL Switch

21-1628.fm Page 6 Tuesday, January 25, 2000 9:30 AM

PREPARATION

POWERING THE CB

You can power your TRC-239 from any of these sources:

•internal batteries (not supplied)

•vehicle battery power (using an optional adapter)

•household AC power (using an optional adapter)

Using the POWER Jack and NI/AL Switch

The POWER jack lets you connect an external power source (such as your vehicle’s battery) or an external AC adapter (not supplied), or an external charger (not supplied) to charge rechargeable batteries (not supplied) while they are in the TRC-239. Before con- necting anything to POWER, you must set NI/AL cor- rectly.

CUSTOM MANUFACTURED IN THAILAND FOR RADIOSHACK. A DIVISION OF TANDY CORPORATION. FORT WORTH. TEXAS 76102 FCC ID: AAO2101678 SERIAL NUMBER

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

AA AA AA

NI AL

Follow these steps to set NI/AL.

1.Slide the battery compartment cover in the direc- tion of the arrow to remove it.

2.Remove any installed batteries.

3.Set NI/AL as follows:

• Set it to AL to use alkaline batteries.

6