![](/images/new-backgrounds/1251224/25122439x1.webp)
SPECIFICATIONS
RECEIVER |
|
|
Frequency Response (1 kHz, 0 dB Reference) |
| |
Lower, at 450 Hz | ||
Upper, at 2500 Hz | ||
Intermediate Frequency |
|
|
First IF | 10.695 MHz | |
Second IF | 455 MHz | |
Maximum Sensitivity | 0.5 ∝V | |
Sensitivity for 10 dB S/N | 0.5 ∝V or Better | |
AGC Figure of Merit 50 mV for 10 dB Change in Audio Output | .................................... 90 dB | |
Overload AGC Characteristics (from 50 mV to 1000 mV) | 4 dB | |
Overall Audio Fidelity at 6 dB Down | 450 | |
Adjacent Channel Selectivity | 55 dB | |
Image Rejection | Typically Better than 60 dB | |
IF Rejection | 65 dB or Better | |
Maximum Audio Output Power | 4 Watts at 8 ohms | |
Squelch Range | Adjustable from 0.5 ∝V to 1 mV | |
Receive Battery Drain | 280 mA to 1500 mA | |
| (from No Signal to Maximum Output) | |
TRANSMITTER |
|
|
Frequency Tolerance | ±0.0005% | |
Maximum Output Power | 4 Watts (Maximum Allowed by the FCC) | |
Spurious Emission | ||
Transmit Battery Drain | 1270 mA to 1870 mA | |
| (from No Modulation to 80% Modulation Limit) | |
Modulation Frequency Response (1 kHz, 0 dB Reference): |
| |
Lower, at 450 Hz | ||
Upper, at 2.5 kHz | ||
Modulation Type and Capacity | A3 and 85% | |
Microphone Sensitivity | 3 ∝V for 50% Modulation | |
GENERAL |
|
|
Channels | 40 | |
Frequency Range | 26.965 MHz to 27.405 MHz | |
Frequency Control | ||
Operating Temperature Range | ||
Power Requirements | 13.8V DC | |
Input Power | 7.5 W (Reference Value) | |
Antenna | 50 Ohm (Coaxial Connector) | |
Microphone | Dynamic Type | |
Internal Speaker | 16 Ohm, 5 Watts | |
Dimensions (HWD) | 19/16 ⋅ 59/16 ⋅ 75/16 Inches | |
|
| (40 mm ⋅ 142 mm ⋅ 185 mm) |
Weight | 2 lbs | |
|
| (930 g) |
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.
20