Manuals
/
Ramsey Electronics
/
Home Audio
/
Radio Antenna
Ramsey Electronics
DA-160 manual Ramsey Da Series Dipole Antenna, Page
Models:
DA-160
1
7
16
16
Download
16 pages
19.36 Kb
4
5
6
7
8
9
10
11
<
>
Parts list
Antenna Wire Length per side
Tuning Your Antenna
Page 7
Image 7
RAMSEY DA SERIES DIPOLE ANTENNA
Page 7
Page 6
Page 8
Page 7
Image 7
Page 6
Page 8
Contents
DA-160
Ramsey Electronics
PARTIAL LIST OF AVAILABLE KITS
DIPOLE ANTENNA KIT
TABLE OF CONTENTS
ANTENNA DESCRIPTION
INTRODUCTION
HOW DOES A DIPOLE ANTENNA WORK?
REQUIRED, NOT SUPPLIED
PARTS LIST
WHAT KIND OF ANTENNA IS BEST FOR YOU?
Page
RAMSEY DA SERIES DIPOLE ANTENNA
ANTENNA CONSTRUCTION
CONSTRUCTION NOTES
NORMAL
Antenna Wire Length per side
ANTENNA
FREQUENCY
262’
160m or ALL BAND
132’
ASSEMBLING THE ANTENNA
Taking the end of one of the wires, pass it through the hole in the insulator until six inches are through. Next, bend the wire back on itself and immediately begin to wrap it very snugly and neatly around itself
wire. You should make sure that the center conductor fits through the hole in the center pin, and there are no stray strands being folded backwards. This will have the unfortunate tendency of shorting out your antenna. The connector should cover the braided wire and trap it against the reducer. Snug it down so that it is firmly on the wire. The braided shield should be caught between the reducer and connector and be held in very tightly
stranded lead about one inch long. Next, strip the center conductor 1/4 inch closer to the end. Tin both leads
TUNING YOUR ANTENNA
RAMSEY ELECTRONICS, INC 793 Canning Parkway
RAMSEY DA SERIES DIPOLE ANTENNA
DA DIPOLE ANTENNA
Quick Reference Page Guide
