Rangemaster RMG1H90SG Charcoal filter recycling version, Lighting, Activation of the alarm signal

Charcoal filter (recycling version)

This filter cannot be washed or regenerated. It must be replaced when the C appears on the display or at least once every 4 months. The filter saturation alarm has to be activated already before.

Activation of the alarm signal

•In the recycling version hoods the filter saturation alarm must be activated during the instal- lation or later.

•Switch off the hood and the lights.

•Press the E-key for about 5 seconds until the last two segments of the motor LEDS are lit on the display.

•By releasing the E-key the clock icon starts to flash.

•Within 3 seconds press the D-key to activate/deactivate charcoal filter saturation alarm.

•C-symbol lit - charcoal filter saturation alarm ACTIVATED.

•C-symbol unlit - charcoal filter saturation alarm DEACTIVATED.

SUBSTITUTION OF THE CHARCOAL FILTER

Alarm reset

•Switch off the motor and the lighting system.

•Press the G-key for at least 2 seconds.

Substitution of the filter

•Open the confort panel.

•Remove the metal grease filters.

•Remove the charcoal filter as indicated in the picture.

•Place the filter again into its seat.

•Place again the metal grease filters into their place.

Lighting

LIGHT REPLACEMENT

20 W halogen light.

• Remove the 2 screws fixing the Lighting support, and pull it out of from the Hood.

• Extract the lamp from the Support.

•Replace with another of the same type, making sure that the two pins are properly inserted in the lamp holder socket holes.

•Replace the Support, fixing it in place with the two screws re- moved as above.

EN	1
	12